Glanze Larger Shank Indexable Lathe Tools



Glanze PSBNR1616 H09 Turning Tool With SNMG09 Insert (Ref: 777231)

Glanze PSBNR1616 H09 Turning Tool With SNMG09 Insert

Glanze Right Hand External Turning tool holder with 8 corner insert (SNMG09) with 90 degree angle.
These turning tools are used for Straight Turning & 15 degree chamfering operations.
16 mm Square Shank- 100 mm long

26.05 31.26


Quantity: 

Related products:
1. Spare SNMG Insert (Ref: SNMG)





Glanze PSBNR2020 H09 Turning Tool With SNMG09 Insert (Ref: 777235)

Glanze PSBNR2020 H09 Turning Tool With SNMG09 Insert

Glanze Right Hand External Turning tool holder with 8 corner insert (SNMG09) with 90 degree angle.
These turning tools are used for Straight Turning & 15 degree chamfering operations.
20 mm Square Shank- 125 mm long

32.65 39.18


Quantity: 

Related products:
1. Spare SNMG Insert (Ref: SNMG)





Glanze PSSNR1616 H09 Turning Tool With SNMG09 Insert (Ref: 777232)

Glanze PSSNR1616 H09 Turning Tool With SNMG09 Insert

Glanze Right Hand External Turning tool holder with 8 corner insert (SNMG09) with 90 degree angle.
These turning tools are used for Straight Turning & 45 degree chamfering operations.
16 mm Square Shank- 95 mm long

Complete with insert & Key




28.34 34.01


Quantity: 

Related products:
1. Spare SNMG Insert (Ref: SNMG)





Glanze PSSNR2020 H09 Turning Tool With SNMG09 Insert (Ref: 777233)

Glanze PSSNR2020 H09 Turning Tool With SNMG09 Insert

Glanze Right Hand External Turning tool holder with 8 corner insert (SNMG09) with 90 degree angle.
These turning tools are used for Straight Turning & 45 degree chamfering operations.
20 mm Square Shank- 120 mm long


Complete with insert & Key

32.65 39.18


Quantity: 

Related products:
1. Spare SNMG Insert (Ref: SNMG)





Set 10 Glanze SNMG Inserts (Ref: SNMG090308)

Set 10 Glanze SNMG Inserts



25.71 30.85


Quantity: 





Spare SNMG Insert (Ref: SNMG)

Spare SNMG Insert



3.65 4.38


Quantity: 





Glanze PWGNR2020 H06 Turning Tool with WNMG06 Insert (Ref: 777227)

Glanze PWGNR2020 H06 Turning Tool with  WNMG06 Insert

These Glanze Right Hand External Turning tools holder use trigon 6 corner insert WNMG06 with an 80 degree angle
TheseTurning tools are used for Straight Turning & 90 degree shoulder Turning as well facing operations.

20 mm Square Shank- 125 mm long



32.65 39.18


Quantity: 





Right Hand External Turning Tool Holder 20mm  (Ref: PCLNR2020K12)

Right Hand External Turning Tool Holder 20mm

Application: This external turning tool holder is used for general application, roughing,semi finishing and finishing.
This multi purpose tool holder has a rhombic negative double side insert which has an angle of 80 degrees with a strong cutting edge. The lever lock ensures good rigidity and chip flow in roughing applications
INCLUDES 1 X 4 SIDED INSERT CNMG 120408 ENTM

36.52 43.82


Quantity: 





Right Hand External Turning Tool Holder 25mm (Ref: PCLNR2525K12)

Right Hand External Turning Tool Holder 25mm

Application: This external turning tool holder is used for general application, roughing,semi finishing and finishing.
This multi purpose tool holder has a rhombic negative double side insert which has an angle of 80 degrees with a strong cutting edge. The lever lock ensures good rigidity and chip flow in roughing applications
INCLUDES 1 X 4 SIDED INSERT CNMG 120408 ENTM

38.26 45.91


Quantity: 





Left Hand External Turning Tool Holder 25mm (Ref: PCLNL2525K12)

Left Hand External Turning Tool Holder 25mm

Application: This external turning tool holder is used for general application, roughing,semi finishing and finishing.
This multi purpose tool holder has a rhombic negative double side insert which has an angle of 80 degrees with a strong cutting edge. The lever lock ensures good rigidity and chip flow in roughing applications
INCLUDES 1 X 4 SIDED INSERT CNMG 120408 ENTM

38.26 45.91


Quantity: 





Spare Insert for PCLNR/PCLNL 20 & 25mm Turning Tool (Ref: CNMG120408)

Spare Insert for PCLNR/PCLNL 20 & 25mm Turning Tool



4.30 5.16


Quantity: 





20MM LH Turning Tool for Roughing , Semi Finishing & Finishing  (Ref: PDJNL2020K15)

20MM LH Turning Tool for Roughing , Semi Finishing & Finishing

Application: This external Turning tool holder is used for general application, roughing, semi finishing and finishing.
This is a turning and profiling toolholder having a rhombic negative double sided insert which has an angle of 55 degrees with a strong cutting edge. It has good rigidity due to the lever lock and chip flow in roughing applications
Includes 1 x Insert DNMG 150608 CTC1135

40.83 49.00


Quantity: 





25MM LH Turning Tool for Roughing , Semi Finishing & Finishing (Ref: PDJNL2525K15)

25MM LH Turning Tool for Roughing , Semi Finishing & Finishing

Application: This external Turning tool holder is used for general application, roughing, semi finishing and finishing.
This is a turning and profiling toolholder having a rhombic negative double sided insert which has an angle of 55 degrees with a strong cutting edge. It has good rigidity due to the lever lock and chip flow in roughing applications
Includes 1 x Insert DNMG 150608 CTC1135- See Below for Spare Inserts

41.74 50.09


Quantity: 





25MM RH Turning Tool for Roughing , Semi Finishing & Finishing  (Ref: PDJNR2525K15)

25MM RH Turning Tool for Roughing , Semi Finishing & Finishing

Application: This external Turning tool holder is used for general application, roughing, semi finishing and finishing.
This is a turning and profiling toolholder having a rhombic negative double sided insert which has an angle of 55 degrees with a strong cutting edge. It has good rigidity due to the lever lock and chip flow in roughing applications
Includes 1 x Insert DNMG 150608 CTC1135 - See Below for Spare Inserts
SORRY OUT OF STOCK

41.74 50.09






CTC1135 INSERT FOR PDJN TOOLS 20MM & 25MM (Ref: DNMGCTC1135)

CTC1135 INSERT FOR PDJN TOOLS 20MM & 25MM

CTC1135 carbide cutting material combines a wear-resistant CVD coating and a heat-resistant core substrate to produce a highly tensue gradient peripheral zone with thickness of 20 µm for turning steel and stainless steel in the ISO P35 application field. This peripheral zone has a shock-absorbing effect and is able to withstand machining thrusts and pushes in turning hard materials in a particularly efficient way. The medium-temperature CVD multi-layer coating is the latest generation, making CTC1135 ideal for turning hard materials.

5.00 6.00


Quantity: 





20MM RH MTJN Turning & Profiling Tool  (Ref: MTJNR2020K16)

20MM RH MTJN Turning & Profiling Tool

Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge. The center pin and top clamp ensure good rigidity and stability in roughing applications. It is suitable for profiling, general applications, roughing, semi finishing and finishing.
Includes 1 x Insert DNMG 150608 CTC1135

39.09 46.91


Quantity: 





20MM LH MTJN Turning & Profiling Tool (Ref: MTJNL2020K16)

20MM LH MTJN Turning & Profiling Tool

Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge. The center pin and top clamp ensure good rigidity and stability in roughing applications. It is suitable for profiling, general applications, roughing, semi finishing and finishing.
Includes 1 x Insert DNMG 150608 CTC1135



39.09 46.91


Quantity: 





CTC1135 INSERT FOR MTJN TOOLS 20MM & 25MM  (Ref: TNMGCTC1135)

CTC1135 INSERT FOR MTJN TOOLS 20MM & 25MM

CTC1135 carbide cutting material combines a wear-resistant CVD coating and a heat-resistant core substrate to produce a highly tensue gradient peripheral zone with thickness of 20 µm for turning steel and stainless steel in the ISO P35 application field. This peripheral zone has a shock-absorbing effect and is able to withstand machining thrusts and pushes in turning hard materials in a particularly efficient way. The medium-temperature CVD multi-layer coating is the latest generation, making CTC1135 ideal for turning hard materials.

5.00 6.00


Quantity: 





SR17 GENERAL PURPOSE INSERT FOR MTJN TOOLS 20MM & 25MM (Ref: TNMGSR17)

SR17 GENERAL PURPOSE INSERT FOR MTJN TOOLS 20MM & 25MM

CTC1135 carbide cutting material combines a wear-resistant CVD coating and a heat-resistant core substrate to produce a highly tensue gradient peripheral zone with thickness of 20 µm for turning steel and stainless steel in the ISO P35 application field. This peripheral zone has a shock-absorbing effect and is able to withstand machining thrusts and pushes in turning hard materials in a particularly efficient way. The medium-temperature CVD multi-layer coating is the latest generation, making CTC1135 ideal for turning hard materials.

5.00 6.00


Quantity: 








Glanze Larger Shank Indexable Lathe Tools - Buy online at Chronos (call us or click live chat for help with Glanze Larger Shank Indexable Lathe Tools)
Visit our engineering blog