Transformers & Accessories for Hand Held Proxon Tools



Proxxon MICROMOT NG 5/E Mains Adaptor 474952 (Ref: 28704)

Proxxon MICROMOT NG 5/E Mains Adaptor 474952

Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for Micromot machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates 'ready'. PTC (Positive-Temperature-Coefficient) element prevents overload (and plugged-in tool will not restart automatically). After cooling down, the mains plug should briefly be unplugged to reset the adaptor. With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the Micromot tool.

DRILL NOT INCLUDED

Input Voltage: 240V
Model: NG 5/E
Output Voltage: 12V

50.63 60.76


Quantity: 





Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 (Ref: 28706)

Proxxon MICROMOT NG 2/S  Single Speed Mains Adaptor 12V 476059

The micromot mains adaptor NG2/S is a 240V to 12-18V / 2.0A unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. Note: Supplies 2.0A at 16 Volt open circuit and 12 Volt under load.

DRILL NOT INCLUDED

Input Voltage 220 - 240V
Model NG 2/S
Nett Weight 1kg
Output Voltage 12 - 18V

The mains adapters do not include the illustrated mill/drill units.

22.84 27.41


Quantity: 

People who bought Proxxon MICROMOT NG 2/S Single Speed Mains Adaptor 12V 476059 also bought::

1. Proxxon MICROMOT 50/EF 12V Rotary Tool 12V 475368





Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 (Ref: 28707)

Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738

The micromot mains adaptor NG2/E is a 230V to 12V unit suitable for many of the Proxxon machines. The NORYL casing is heat resistant, which is a necessity for transformer enclosures. The red LED indicates readiness for use and the PTC element (Positive temperature coefficient) prevents overload of the unit. A foldable tool rest provides a secure place for keeping the Micromot tools at the ready. The mains adaptors do not include the illustrated mill/drill units.

DRILL NOT INCLUDED

Input Voltage 240V
Model NG 2/E
Nett Weight 1kg
Output Voltage 12V


26.09 31.31


Quantity: 

People who bought Proxxon MICROMOT NG 2/E 2A Variable Speed Mains Adaptor 12V 475738 also bought::

1. Proxxon Sanding Sheets for PS 13 Pensander 240 Grit 477427
2. Proxxon Sanding Sheets for PS 13 Pensander 180 Grit 477426
3. Proxxon PS 13 Pensander 12V 475318





Proxxon UHZ Universal Holder 475557 (Ref: 28610)

Proxxon UHZ Universal Holder 475557

Socket & clamp like the precision vice FMZ. The 34mm bore accepts all Proxxon MICROMOT machines, either directlyor via the 20mm reducing bush. The ball joint may be swivelled in all directions.

21.26 25.51


Quantity: 

People who bought Proxxon UHZ Universal Holder 475557 also bought::

1. PROXXON MICROMOT 230/E DRILL GRINDER - NEW ! 28440
2. Proxxon FMZ Precision Vice 702052
3. Proxxon Precision drill/grinder FBS 240/E 410475





Proxxon Tool Holder for Rotary Tools 476259 (Ref: 24098)

Proxxon Tool Holder for Rotary Tools 476259

Key Features

For use on lathe machines
Made of steel 30 x 10 x 65mm
Allows mounting of the rotary tool LB/E or IB/E to the tool post of the PD 230/E and PD 400 Lathes
Collar size 20mm
Shank 8 x 10mm for tool holders PD 230/E & PD 400

11.76 14.11


Quantity: 

People who bought Proxxon Tool Holder for Rotary Tools 476259 also bought::

1. Set of 3 HSS Step Drills
2. SET OF THREE M6 X 1 HSS TAPS - TAPER SECOND & PLUG
3. SET OF THREE M5 X 0.8 HSS TAPS - TAPER SECOND & PLUG





Proxxon Micromot Flexishaft 110/BF 211025 (Ref: 28622)

Proxxon Micromot Flexishaft 110/BF 211025

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine. Highly flexible core (does not run hot when working with tight radii). Length 100cm. For a maximum of 25,000rpm. Includes 0.3-3.2 mm quick action chuck. Practical when working with different shaft diameters.

A truly flexible shaft some 1 metre long with delicate hand piece complete with chuck for accurate holding of rotary tools a. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.


23.31 27.97


Quantity: 





Proxxon MICROMOT Flexishaft 110/P 211035 (Ref: 28620)

Proxxon MICROMOT Flexishaft 110/P 211035

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine. Highly flexible core (does not run hot when working with tight radii). Length 100cm. For a maximum of 25,000rpm. Includes 6 steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).

A truly flexible shaft some 1 metre long with delicate hand piece complete with six steel collets (ranging from 1mm to 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.


24.90 29.88


Quantity: 





Proxxon MICROMOT MB 200 Drill Stand 28600 (Ref: 502021)

Proxxon MICROMOT MB 200 Drill Stand 28600

The MICROMOT MB 200 drill stand is made from diecast aluminium and has a head which can be tilted through 90° allowing for diagonal drilling. It has a standard 20mm collar for MICROMOT drilling and milling machines. The solid, hard chromium plated steel column measures 280 x 20mm and gives a throat capacity of 140mm. The table measures 220 x 120mm and has all holes pre-drilled and tapped to accept the KT 70 compound table. Weight 2.2kg.

68.48 82.18


Quantity: 





Proxxon PRIMUS Vice - 100 mm 474867 (Ref: 20402)

Proxxon PRIMUS Vice - 100 mm 474867

* Multipurpose Vices feature exact feed
* For industry and demanding hobbists
* Interchangeable hardened jaws, slotted vertically and horizontally
* Both jaws are slotted at the top for gripping flat work pieces
* Solid, cast iron base with CNC machined ways
* Feed screw features a rolled thread for ease of movement



Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads.



55.02 66.02






Proxxon MICROMOT Protective Cover 950541 (Ref: 28944)

Proxxon MICROMOT Protective Cover 950541

A protective cover for hand held MICROMOT tools with a 20mm collar. Protects the user when using saw blades, grinding and polishing tools or when using a steel wire brush. Maximum tool diameter 22mm. Clamps with a thumb wheel.

3.92 4.70


Quantity: 

People who bought Proxxon MICROMOT Protective Cover 950541 also bought::

1. Proxxon IB/E Professional Mini Drill/Grinder - 240V 300121
2. Proxxon Tool Holder for Rotary Tools 476259





Proxxon MICROMOT MB 140/S Drill Stand 474982 (Ref: 28606)

Proxxon MICROMOT MB 140/S Drill Stand 474982

The 120 x 220mm milled table is fitted with a fence and a scale. The solid column is chrome plated and the headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via a drive disc and ball-bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90° in both directions. The drill stand features a depth stop as well as drilled, tapped holes for securing the KT 70 Compound Table. The MS 4 Machine Vice can also be fitted, it is made of die-cast zinc with three machined sides and horizontal and vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.
Drill & vice pictured are optional extras

42.71 51.25


Quantity: 





Proxxon FMZ Precision Vice 702052 (Ref: 28608)

Proxxon FMZ Precision Vice 702052

Quickly and securely clamps to work benches and tabletops up to 60 mm thick. Stands freely or can be fixed down. Rotates in all directions, including flush to the surface. 75 mm jaws with removable rubber covers. Zinc die-cast vice with ball and socket. Jaws also with vertical and horizontal V-slots. Max. clamping width 70mm. Weight 1.6 kg.

25.69 30.83


Quantity: 

People who bought Proxxon FMZ Precision Vice 702052 also bought::

1. Proxxon UHZ Universal Holder 475557
2. Proxxon Precision drill/grinder FBS 240/E 410475





Proxxon Dividing Head for MF70 & TBM220 474592  (Ref: 24264)

Proxxon Dividing Head for MF70 & TBM220  474592

* Used to drill off-set holes & to mill off-set slots, rectangles, hex shapes, etc.
* Scale on the housing enables high accuracy divisions
* Chuck with reversible jaws
* Clamps 1.5 - 32mm internal & 12 - 65mm external
* 11 mm bore allows the passage of longer work pieces when used in the horizontal position
* Fixng holes for horizontal & vertical assembly
* Suitable sliding blocks & fixation screws for assembly to MICRO Miller MF 70 & Compound Table KT 70
* Supplied in wooden box with sliding lid


This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 - 32mm internally and 12 - 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.

77.54 93.05


Quantity: 

People who bought Proxxon Dividing Head for MF70 & TBM220 474592 also bought::

1. Proxxon Corundum Cutting Discs and arbor - 38mm 477600
2. Proxxon KT 70 MICRO Compound Table 702050
3. Proxxon 3 Piece Tungsten Milling Cutter Set





Proxxon MICROMOT Step Clamp Set 702051 (Ref: 24256)

Proxxon MICROMOT Step Clamp Set 702051

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard (11.5 x 11 x 4mm) and bolts. This set also fits the lathes PD 230/E and PD 400.

15.79 18.95


Quantity: 

People who bought Proxxon MICROMOT Step Clamp Set 702051 also bought::

1. Proxxon 3 Piece Tungsten Milling Cutter Set





Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071 (Ref: 20394)

Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071

T-nut set for PRIMUS vices. 2 T-nuts, screws and the necessary accessories. For fixing to the drill tables of: BFB 2000, KT 150 and drill press TBH.

7.29 8.75


Quantity: 

People who bought Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071 also bought::

1. Set of 3 Flycutters 3/8 Shank with Ground Toolbits
2. Set 3 Flycutters with 1/2 shank
3. Proxxon TBH Bench Drill 702069





Proxxon PRIMUS Vice - 75mm 475090 (Ref: 20392)

Proxxon PRIMUS Vice - 75mm 475090

* Multipurpose Vices feature exact feed
* For industry and demanding hobbists
* Interchangeable hardened jaws, slotted vertically and horizontally
* Both jaws are slotted at the top for gripping flat work pieces
* Solid, cast iron base with CNC machined ways
* Feed screw features a rolled thread for ease of movement

* PRIMUS 75: 75mm jaw width, 65mm opening


Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads.



40.77 48.92


Quantity: 

People who bought Proxxon PRIMUS Vice - 75mm 475090 also bought::

1. HSS DRILL SET 50 pc 1-6mm x 0.1 mm SORRY OUT OF STOCK
2. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)
3. Proxxon Tungsten Carbide Milling Bits Straight (3mm) 477082








Transformers & Accessories for Hand Held Proxon Tools - Buy online at Chronos (call us or click live chat for help with Transformers & Accessories for Hand Held Proxon Tools )
Visit our engineering blog