Milling Tools & Accessories



MILLING DVD- Mini Machines 101 Vol. 1: Mill Basics & Clamping  (Ref: MD1)

MILLING DVD- Mini Machines 101 Vol. 1: Mill Basics   & Clamping

SPECIAL OFFER £9.95 INC VAT !! - ONLY WHILE STOCKS LAST

n this volume, we'll discuss the basics of the mill, from terminology and basic clamping, all the way to specialized fixtures and appliances for multi-part production.
Along the way, we'll cover some of the tools and equipment you'll most likely need, and delve into how and why to make specialized fixtures.

Section 1: Introduction and Safety
Section 2: Terminolgy and Nomenclature, Tools and Equipment, Clamping Basics
Section 3: Squaring (aligning) the Stock, Squaring Round Stock, Setting up the Screwless Vise, Bedplates & Specialized Fixtures
Running time: 50 minutes

8.29 9.95


Quantity: 





Endmill Holder- 2MT 1/2 (Ref: 200632)

Endmill Holder- 2MT 1/2

Very useful for efficient holding of endmills and slot drills or similar tooling in light and heavy duty milling machines and small lathes. Eliminates the need of a collet chuck. The machining area is easily visible while doing intricate components. Manufactured from case hardened steel. Precisely ground externally internally to very close tolerances with concentricity within +- 10 microns.

2 morse taper with a drawbar thread of 3/8 BSW
Accepts 1/2 shank cutters

7.92 9.50


Quantity: 

People who bought Endmill Holder- 2MT 1/2 also bought::

1. MORSE TAPER 2 COLLET 3/8
2. MORSE TAPER 2 COLLET 12 MM
3. MORSE TAPER 2 COLLET 1/2





Endmill Holder- 2MT 1/4 (Ref: 200630)

Endmill Holder- 2MT 1/4

Very useful for efficient holding of endmills and slot drills or similar tooling in light and heavy duty milling machines and small lathes. Eliminates the need of a collet chuck. The machining area is easily visible while doing intricate components. Manufactured from case hardened steel. Precisely ground externally internally to very close tolerances with concentricity within +- 10 microns.

2 morse taper with a drawbar thread of 3/8 BSW
Accepts 1/4 shank cutters

7.92 9.50


Quantity: 





Endmill Holder- 2MT 3/8 (Ref: 200635)

Endmill Holder- 2MT 3/8

Very useful for efficient holding of endmills and slot drills or similar tooling in light and heavy duty milling machines and small lathes. Eliminates the need of a collet chuck. The machining area is easily visible while doing intricate components. Manufactured from case hardened steel. Precisely ground externally internally to very close tolerances with concentricity within +- 10 microns.

2 morse taper with a drawbar thread of 3/8 BSW

Accepts 3/8 shank cutters

7.92 9.50


Quantity: 





Endmill Holder- 2MT 5/8 (Ref: 42048008)

Endmill Holder- 2MT 5/8

Very useful for efficient holding of endmills and slot drills or similar tooling in light and heavy duty milling machines and small lathes. Eliminates the need of a collet chuck. The machining area is easily visible while doing intricate components. Manufactured from case hardened steel. Precisely ground externally internally to very close tolerances with concentricity within +- 10 microns.

2 morse taper with a drawbar thread of 3/8 BSW

Accepts 5/8 shank cutters

9.92 11.90


Quantity: 





Set of 3 Endmill Holders MT2 (Ref: 200666)

Set of 3 Endmill Holders MT2

Set of Three Endmill Holders 2MT
1/4 , 3/8 , 1/2

Very useful for efficient holding of endmills and slot drills or similar tooling in light and heavy duty milling machines and small lathes. Eliminates the need of a collet chuck. The machining area is easily visible while doing intricate components. Manufactured from case hardened steel. Precisely ground externally internally to very close tolerances with concentricity within +- 10 microns.


Tapped 3/8 BSW for a drawbar

20.85 25.02


Quantity: 

People who bought Set of 3 Endmill Holders MT2 also bought::

1. Magnetic Base for Halogen & LED Lamps
2. Dustproof LED Gooseneck Lamp **SPECIAL OFFER**
3. HSS ENDMILL 5/32" DIAMETER





Endmill Holder MT 3 x 3/8 (Ref: 42048012)

Endmill Holder MT 3 x  3/8

Made of high quality alloy steel for long, durable service life
Hardened and ground to ensure maximum accuracy
These end mill holders have been precision-balanced to minimize
spindle bearing and tool wear while providing tighter accuracy

Tapped 3/8 BSW for a drawbar


9.99 11.99


Quantity: 





Endmill Holder MT 3 x 1/2 (Ref: 42048014)

Endmill Holder MT 3  x 1/2

Made of high quality alloy steel for long, durable service life
Hardened and ground to ensure maximum accuracy
These end mill holders have been precision-balanced to minimize
spindle bearing and tool wear while providing tighter accuracy

Tapped 3/8 BSW for a drawbar


9.99 11.99


Quantity: 

People who bought Endmill Holder MT 3 x 1/2 also bought::

1. Endmill Holder MT 3 x 5/8
2. Dasqua Digital Zero Setting Device





Endmill Holder MT 3 x 5/8 (Ref: 42048016)

Endmill Holder MT 3  x 5/8

Made of high quality alloy steel for long, durable service life
Hardened and ground to ensure maximum accuracy
These end mill holders have been precision-balanced to minimize
spindle bearing and tool wear while providing tighter accuracy

Tapped 3/8 BSW for a drawbar


11.99 14.39


Quantity: 

People who bought Endmill Holder MT 3 x 5/8 also bought::

1. Endmill Holder MT 3 x 1/2
2. Dasqua Digital Zero Setting Device





Small Vertical Milling Slide  (Ref: 110370)

Small Vertical Milling Slide

This small vertical milling slide is suitable for smaller lathes
Height - 4" Width - 2"T slot - 3/8 Base - 2 3/4Sq

Attaches via 2 Tee Nuts




48.00 57.60


Quantity: 

People who bought Small Vertical Milling Slide also bought::

1. 5" Backplate Threaded to Suit Myford
2. Bunting Rectangular Magnetic Chuck Fine Pitch 175 x 100 mm
3. Single Point Diamond Grinding Wheel Dresser





Milling Machine Head Setting Tool Imperial (Ref: SDP500)

Milling Machine Head Setting Tool Imperial

NEW PRODUCT FOR SQUARING THE HEAD ON YOUR MANUAL MILLING MACHINE!
ADVANTAGES OF THE SDP500

» Self-calibrating Unit--no need for any additional measuring tools!.
» Comes fully assembed with two Imperial indicators mounted- 2" Face diameter . Range 0- 0.5" , Calibrated to 0.0005"
» Machinist designed and tested for accuracy and ease of use.
* 4" between contact points
* Comes in a nice wooden storage box
* Ground surface, solid steel construction of body

Shank is 1/2 inch

* Size is 6 3/4 wide and 5 1/2 from top of shank to end of contact points

CLICK THE IMAGE FOR A LARGER IMAGE








104.73 125.68


Quantity: 

People who bought Milling Machine Head Setting Tool Imperial also bought::

1. SOFT BLANK END ARBOR 2 MT TANG END





Milling Machine Head Setting Tool Metric (Ref: SDP600)

Milling Machine Head Setting Tool Metric

NEW PRODUCT FOR SQUARING THE HEAD ON YOUR MANUAL MILLING MACHINE!
ADVANTAGES OF THE SDP600

» Self-calibrating Unit--no need for any additional measuring tools!.

» Comes fully assembed with two Imperial indicators mounted- 55 mm Face diameter . Range 0- 0.5 mm , Calibrated to 0.01 mm

» Machinist designed and tested for accuracy and ease of use.

* 100 mm between contact points

* Comes in a nice wooden storage box

* Ground surface, solid steel construction of body

Shank is 1/2 inch

* Size is 150 wide and 130 mm from top of shank to end of contact points

CLICK THE IMAGE FOR A LARGER IMAGE








104.73 125.68


Quantity: 

People who bought Milling Machine Head Setting Tool Metric also bought::

1. Universal Multipurpose Metalbender





SCT Horizontal Milling Attachment R8 (Ref: SMA193S)

SCT Horizontal Milling Attachment R8

RIGHT ANGLE MILLING ATTACHMENT WITH SPINDLE AND SUPPORT

DESIGNED TO SIMPLIFY RIGHT ANGLE WORK. INCLUDES ALIGNING PADS FOR QUICK POSITIONING. THIS UNIT USES PRECISION HARDENED & GROUND SPIRAL BEVEL GEARS. DUCTILE IRON BODY

IT IS SUITABLE FOR MACHINES WITH A QUILL DIAMETER OF BETWEEN 85.725mm - 86mm

324.00 388.80


Quantity: 





Vertex Right Angled Milling Head NT30  (Ref: VRANT30)

Vertex Right Angled Milling Head NT30

These right angled heads are used on vertical milling machines for horizontal work. They are extremely rigid and suitable for heavy duty cutting.
Suits Quill Dia 85.7-86 mm

299.60 359.52


Quantity: 





2 MT Stub / Slitting Saw Arbor STA2  (Ref: 202800)

2 MT Stub / Slitting Saw  Arbor STA2

These stub arbors are ideal for holding side and face cutters or slitting saws. Countersunk screw and thick washer allow the cutter to be positioned near the end of the arbor whilst still giving sufficient locking power. Body manufactured of medium tensile steel and ground all over. Supplied with 3/16 and 5/16 spacing collars which are ground all over . For 1" bore cutters.

27.27 32.72


Quantity: 

People who bought 2 MT Stub / Slitting Saw Arbor STA2 also bought::

1. HSS SLITTING SAW 3" DIA X 1/8 WIDE X 74 TEETH
2. HSS SLITTING SAW 3" DIA X 1/16 WIDE X 74 TEETH
3. 2 Morse Taper Slitting Saw Arbor





3 MT Stub / Slitting Saw ArborsSTA3 (Ref: XC8.)

3 MT Stub / Slitting Saw  ArborsSTA3

These stub arbors are ideal for holding side and face cutters or slitting saws. Countersunk screw and thick washer allow the cutter to be positioned near the end of the arbor whilst still giving sufficient locking power. Body manufactured of medium tensile steel and ground all over. Supplied with 3/16 and 5/16 spacing collars which are ground all over . For 1" bore cutters.

Tapped 3/8 BSW for a drawbar

27.27 32.72


Quantity: 

People who bought 3 MT Stub / Slitting Saw ArborsSTA3 also bought::

1. HSS SLITTING SAW 3" DIA X 1/16 WIDE X 30 TEETH
2. HSS SLITTING SAW 4" DIA X 1/32 WIDE X 100 TEETH
3. HSS SLITTING SAW 3" DIA X 1/64 WIDE X 74 TEETH





R8 Stub / Slitting Saw Arbors  (Ref: XC9.)

R8 Stub / Slitting Saw Arbors

These stub arbors are ideal for holding side and face cutters or slitting saws. Countersunk screw and thick washer allow the cutter to be positioned near the end of the arbor whilst still giving sufficient locking power. Body manufactured of medium tensile steel and ground all over. Supplied with 3/16 and 5/16 spacing collars which are ground all over . For 1" bore cutters.

30.97 37.16


Quantity: 

People who bought R8 Stub / Slitting Saw Arbors also bought::

1. HSS SLITTING SAW 3" DIA X 1/32 WIDE X 74 TEETH
2. HSS SLITTING SAW 3" DIA X 1/8 WIDE X 74 TEETH
3. HSS DRILL BIT 1/8





NT30 - MT2 Convertors (Ref: NT30MT2)

NT30 - MT2 Convertors

For easily converting an NT30 spindle to accept 2 morse taper equipment. Tapped 1/2 BSW

20.00 24.00


Quantity: 





NT30 - MT3 Convertors (Ref: NT30MT3)

NT30 - MT3 Convertors

For easily converting an NT30 spindle to accept 3 morse taper equipment. Tapped 1/2 BSW

20.00 24.00


Quantity: 





R8-2 MT Convertor  (Ref: R8CV2)

R8-2 MT Convertor

For easily converting an R8 spindle to accept 2 morse taper equipment

14.66 17.59


Quantity: 

People who bought R8-2 MT Convertor also bought::

1. R8 Stub / Slitting Saw Arbors
2. Wire Gauge Drill Number 42
3. 2 Pc Adjustable U Clamp Set 0-100 mm





R8-3 MT Convertor SORRY OUT OF STOCK (Ref: R8CV3)

R8-3 MT Convertor  SORRY OUT OF STOCK

For easily converting an R8 spindle to accept 3 morse taper equipment

13.66 16.39



People who bought R8-3 MT Convertor SORRY OUT OF STOCK also bought::

1. HSS ENDMILL 16 MM DIAMETER
2. Quill Stop For Bridgeport Mills Etc
3. Quality Drill Chuck 1 - 16 mm with an R8 Arbor





Open Ended Adaptor 2-3MT  (Ref: OPS1.)

Open Ended Adaptor 2-3MT

This adaptor enables 2MT equipment to be used on machines which normally require 3MT tooling. They are open ended for use with a drawbar. Nut for easy ejection is included.

18.17 21.80


Quantity: 





MORSE TAPER ARBORS FOR 16MM BORE CUTTERS (Ref: M16ST)

MORSE TAPER ARBORS FOR 16MM BORE CUTTERS

NEW FROM CHRONOS!! AVAILABLE IN 2 OR 3MT - THESE ARE SUPERB ARBORS FOR HOLDING 16 MM BORE CUTTERS ETC. PRECISION GROUND WITH 4 SPACING COLLARS- VERY VERSATILE. TAPPED 3/8 BSW

43.71 52.45


Quantity: 





Machine Jack  (Ref: MJ1)

Machine Jack

The machinists jack is a workshop tool that has many uses. It is made of heavy cast steel and has an adjustable screw with a tilting swivel head which has a one inch adjustment.

3.54 4.25


Quantity: 

People who bought Machine Jack also bought::

1. HSS DRILL BIT 2.5 MM
2. 1/2" Bent Lathe Dog
3. HSS DRILL BIT 1.7 MM





Set of 4 Machinists Jacks  (Ref: 111231)

Set of 4 Machinists Jacks

New from Soba
A set of 4 Machine Jacks in a handy carry case.
Used for levelling on fixtures , drill presses , milling machines , planers , and electric appliances or any place where levelling is required.
Heavy cast steel base with adjustable screw and tilting head and locknut for permanent positioning
3" high (4" when fully extended)


14.30 17.16


Quantity: 

People who bought Set of 4 Machinists Jacks also bought::

1. Soba Fully Adjustable Magnetic Stand for Dial Gauges with Push Button
2. Set of 8 Packing Block (Step Blocks)
3. Pack of Two HSS Threading Tools Metric & Imperial 10mm





New 7 pc Machinists Jack Set  (Ref: 111240)

New 7 pc Machinists Jack Set

New Machine Jack set - very useful when setting up etc.
ange 56 mm - 81 mm

Cick the image for a larger picture

15.44 18.53


Quantity: 

People who bought New 7 pc Machinists Jack Set also bought::

1. Plastic File Handle for 8 inch files
2. Plastic File Handle for 4 or 6 inch files
3. Steel Blacking Kit 2 Lites





Packing Blocks Step Clamps  (Ref: PB33)

Packing Blocks Step Clamps

Very useful on milling machines etc. Made of steel . Each set consists of 2 large blocks 65 x38 x19 mm and 2 small blocks 40 x 25 x 19mm. Minimum height 25 mm Maximum height 51 mm

9.00 10.80


Quantity: 

People who bought Packing Blocks Step Clamps also bought::

1. SCT 6" Angle Plates Open End
2. SPARE DCMT INSERT TiN COATED (GOLD)
3. Set of M6 TEE Nuts





Set of 8 Packing Block (Step Blocks)  (Ref: 120661)

Set of 8 Packing Block (Step Blocks)

Very useful on milling machines etc

. Made of steel .

CONTENTS

Step Block - 40 x 25 x 18 mm x 4 PCS

Step Block - 65 x 35 x 18 mm x 4 PCS

16.50 19.80


Quantity: 

People who bought Set of 8 Packing Block (Step Blocks) also bought::

1. HSS DRILL SET 50 pc 1-6mm x 0.1 mm SORRY OUT OF STOCK
2. Soba 4" Rotary Table HV4 Type
3. Packing Blocks Step Clamps





Speed Handle,For Milling Machine Vise, etc (Ref: QH34)

 Speed Handle,For Milling Machine Vise, etc

Speedy Handle for Milling Machine , Vices etc
Aluminium hub with 3/4 Hexagon Bore
Handles are 6" long

29.00 34.80


Quantity: 





Universal Milling Machine Stop  (Ref: 2099008)

Universal Milling Machine Stop

Suits Bridgeport type machines. Quick action clip for rapid depth setting.


Serves as a rigid stop for milling set-up
Use with vises, angle plates, jigs, etc
Made of hardened tool steel


10.94 13.13


Quantity: 

People who bought Universal Milling Machine Stop also bought::

1. R8 Stub / Slitting Saw Arbors
2. HSS SLITTING SAW 3" DIA X 1/32 WIDE X 74 TEETH
3. Solid Body Scriber with Carbide Tip





Quill Stop For Bridgeport Mills Etc (Ref: 2099003)

Quill Stop For Bridgeport Mills Etc

For Bridgeport Type Mills

Fits all Bridgeport Mills
Fits any 1/2 – 20 threaded quill screw applicationQuill Stop
Top or bottom positioning
Adjusts in seconds…fast, spring-loaded action
.020 fine adjustment
Reduces set-up time

4.99 5.99


Quantity: 

People who bought Quill Stop For Bridgeport Mills Etc also bought::

1. Woodworking Drill/Countersink Set **SPECIAL OFFER**
2. R8-3 MT Convertor SORRY OUT OF STOCK
3. R8 Collet 2 MM





Vice Work Stop  (Ref: 2099007)

Vice Work Stop

Rigid stop for milling set-ups. Used with vices , jigs etc.

Vise Work Stop For Milling/Machine Vises-NEW
Fits angle lock type vises
7/8" Capacity
Single thumb screw tightens clamp to vise jaw
Two ground pins on both sides of clamp
Easily mounts to the top of most vise jaws


5.47 6.56


Quantity: 

People who bought Vice Work Stop also bought::

1. Packing Blocks Step Clamps
2. Machine Jack
3. Edge Finder 4mm





Vertex Precision Cross Table  (Ref: VCT514)

Vertex Precision Cross Table

Excellebt Compound Table with accuracy of 0.02mm/100mm
The sliding surfaces are treated by heat treatment and are precision ground



426.00 511.20


Quantity: 





SCT Cross Slide Milling Table  (Ref: 41072002A)

SCT Cross Slide Milling Table

These rigid precision built slide tables are used for inspection and layout as well as various machining and positioning operations. • All tables are equipped with the comfortable handles with living sleeve that provide rapid positioning.
• The handles do not extend below the base to eliminate interference with the machine table.
• There are bearings equipped with the guide screw for providing accurate and smooth operation
• Accuracy 0.06~0.08mm/200mm
• Parallelism 0.06~0.08mm/200mm
• Backlash 0.06mm

18 1/2" x 6" (Table size)
Base size 10 1/2" x 8" with 4 clamping slots
Total Height of Table is 5" (from base to table)
Graduated Dials in Imperial

Tee-slot size 16mm at the top- 25 mm at the bottom

300mm/12" of travel

2 Tee-slots across the bed

28kg

X Travel 270 mm
Y Travel - 120 mm




164.17 197.00


Quantity: 

People who bought SCT Cross Slide Milling Table also bought::

1. Set of M10 TEE Nuts
2. Glanze 10 mm Profiling Tool XC41





SCT Mini Cross Slide Milling Table (Ref: 41314000)

SCT Mini Cross Slide Milling Table

With 2 axes, mini series,Used in precision engineering
and in test and measurement laboratories.

Extremely well made , accuarte item , Compact design.
Very versatile
Table size: 200 x 100mm
X-travel: 135 mm, Y-travel:70mm
Dial calibration: 0.02mm and travel 1.00mm per
revolution.
T-slot: 30mm between two T-slot center.
T-Slot size: 8mm
Weight 6KG

Footprint Area - 100 x 160 mm

Four Mounting Slots (10mm wide) - 100 mm Between Centres

CLICK THE IMAGE FOR A LARGER PICTURE

Approximate shipping weight: 6KG
Material:Cast iron









94.50 113.40


Quantity: 

Related products:
1. Set of M6 TEE Nuts (Ref: 120602)





Soba Compound Slide Table  (Ref: 110340)

Soba Compound Slide Table

Produced from close grained cast iron with the castings stress relieved . The tops are precision grpond to 0.001" (0.025 mm) . Total indicator reading dials are graduated in 0.001" increments with a wheel handle at the ends of the table top . Positioning may be performed from either side

Table size - 6 x 6 "
Height - 5 1/8"
Cross Travel - 5"
Longitudinal Travel - 5"
T slots - 1/2
Wheel Calibration 0.001"
Weight - 16 KG

121.00 145.20


Quantity: 





ALSGS Power Feed Attachment For Milling Machines X Axis 240 V  (Ref: AL510SX)

ALSGS Power Feed Attachment For Milling Machines X Axis 240 V

Click Here to View the Manual

NEW ! 240 V POWER FEED - STANDARD 3 PIN PLUG - NO TRANSFORMER REQUIRED

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

These power table feeders are easily fitted to many of today's popular milling machines especiall y Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .

Specifications
Model R.P.M Max.R.P.M Max. Torque Voltage
SCT-AL510SX 0-200 200 650 in/lb 240v

Features
Functions with low noise, large torque, & high speed, Easy convenient installation
and flexible operation,.

Functional Overview
1.Model SCT-AL510SX
This power feed is designed to
install on the right side of a knee mill table to provide powered longitudinal movement of the table.


A. Limit Switch: Stops powered table movement
when either limit stop presses a plunger
on the switch.

B. Limit Stop: Activates the limit switch. Secure
these devices along the table to set the range
of movement.

C. Rapid Movement Button: Moves the table
at the maximum speed in the direction selected.

D. Direction Lever: Starts, reverses, and stops
longitudinal table movement.

E. Speed Dial: Controls the speed that the table
moves—turn the dial clockwise to increase
the speed.

F. Reset Button: When a current over 3.5
amps passes through the unit for more than
10 seconds, the internal circuit switch will cut
the power to the unit. I nvestigate and resolve
any problems, then use this button to reset
the internal circuit switch.

G. ON/OFF Switch: The master power switch
for the power feed.

H. Power Lamp: Lights when the power feed is
turned ON.




265.00 318.00


Quantity: 

People who bought ALSGS Power Feed Attachment For Milling Machines X Axis 240 V also bought::

1. 3" Stepped Angle Plate
2. Set of 3 1/2" Dia Indexable Boring Bars
3. Set of M10 TEE Nuts





Align Power Table Feed for Major/Minor etc  (Ref: AL99)

Align Power Table Feed for Major/Minor etc

Right Click Here to Download the Complete document in PDF Format or Left Click to View it Online

These power table feeders are easily fitted to many of today's popular milling machines including the Warco Major and Minor machines etc. . Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. Two models are currently available. As both units are 110v we also offer a quality transformer. If you are unsure please ask for our free fitting instructions prior to purchase!!







272.28 326.74


Quantity: 





Align Transformer for Power Feeds  (Ref: TEF01)

Align Transformer for Power Feeds


TR1: Output TR2:2 Output
Output: 110V 50/60Hz,
Power supply: 50/60Hz, 1-phase
220, 240,

49.17 59.00


Quantity: 





Horizontal/Vertical NC Tool Tightening Fixture No 30 (Ref: 41191101)

Horizontal/Vertical NC Tool Tightening Fixture No 30

•Operation is very simple and it's very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder



NOTE - COLLET CHUCK ETC NOT INC - ONLY THE FIXTURE AS BELOW




Base - 125 x 50 x 20 mm
Overall Height - 75 mm

CLICK THE IMAGE FOR A LARGER PICTURE

53.00 63.60


Quantity: 





Horizontal/Vertical NC Tool Tightening Fixture No 40  (Ref: 41191102)

Horizontal/Vertical NC Tool Tightening Fixture No 40

•Operation is very simple and it's very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder



NOTE - COLLET CHUCK ETC NOT INC - ONLY THE FIXTURE AS BELOW




Base - 160 x 60 x 20 mm
Overall Height - 100 mm

CLICK THE IMAGE FOR A LARGER PICTURE

58.00 69.60


Quantity: 

People who bought Horizontal/Vertical NC Tool Tightening Fixture No 40 also bought::

1. 105 pc General Purpose Set **SPECIAL OFFER**
2. Edge Finder 4mm
3. Dasqua Three Points inside Micrometer Set 12 - 20 mm , 12-16 , 16-20 mm)





Horizontal/Vertical NC Tool Tightening Fixture No 50 (Ref: 41191103)

Horizontal/Vertical NC Tool Tightening Fixture No 50

•Operation is very simple and it's very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder



NOTE - COLLET CHUCK ETC NOT INC - ONLY THE FIXTURE AS BELOW




Base - 180 x 100 x 25 mm
Overall Height - 150 mm

CLICK THE IMAGE FOR A LARGER PICTURE

60.00 72.00


Quantity: 








Milling Tools & Accessories - Buy online at Chronos (call us or click live chat for help with Milling Tools & Accessories)
Visit our engineering blog