Clicky

Clarke Lathes

Clamp Type Knurling Tool for Mini Lathes ! New from Chronos

12mm Clamp Type Knurling Tool
NEW ! – IDEAL FOR CLARKE CL300 , SIEG AND MOST OTHER SMALL MINI LATHES

This 12mm Clamp Type Knurling Tool fits any 12mm lathe tool post and is positioned so the knurling clamp above and below the centre of the work- Much better than pushing against the work !

The self-centring mechanism for a nice even finish

Knurling Wheel Diameter: 26mm.
Maximum Knurling Diameter: 25mm.
Fitted with Medium Diamond Pattern Knurls

Clamp Type Knurling Tool for Mini Lathes ! New from Chronos Read More »

Model Engineering Supplies from Chronos Ltd

Chronos sell engineering tools & model engineering supplies around the world via a speedy mail order service. 20,000+ engineering and woodworking products. We feature Myford Lathe compatible accessories, Clarke lathes, Unimat lathe accessories, milling machines and Vertex rotary tables and machine tool accessories. You can use our online Engineering Chat facility if you need any help, or call 01582 471900 or email – sales@chronos.ltd.uk . DELIVERY IS FREE to most UK mainland addresses

Model Engineering Supplies from Chronos Ltd Read More »

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) This is a scaled down version of the well known Piston Type Toolpost Systems ALL STEEL This NEW Mini Piston Type Quick Change Toolpost set provides instant tool changeover from one operation to another. It is fully hardened and ground and the working

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS Read More »

3″ / 75 MM TILTING ROTARY TABLE SPECIAL OFFER !!

This is the very latest 3″/75mm Tilting Rotary Table
Unlike inferior copies it has 4 T-slots for fixing work
Table tilts upto 90 degrees and can be used anywere in between and locked. The tilting actions is graduated
The base is 100 x 95 mm with 2 x 10mm mounting holes which are 80 mm apart
Overall height when not tilted is 55 mm
The table is graduated 0-360 degrees in 5 degree divisions
The handle is graduated 0-10 degrees in 5 minute divisions

3″ / 75 MM TILTING ROTARY TABLE SPECIAL OFFER !! Read More »

Clarke PSP105 Puddle Pump With Auto Sensor (Ref: 7230693)

250W Puddle Pump with Auto sensor – This submersible pump is ideal for draining flooded cellars, sumps etc.This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as1mm from the floor.

250W 230V motor
3 position auto sensor allows remaining water level to be set
Outlet:1.5″ BSP with non-return valve.
3 step outlet adaptor; 1″ BSP, 1″hose,1 ½” hose
100l/min rated maximum flow rate
0m/6m Min/max head
Max depth 5m
Cable length 10m
Weight 4kg

Note: Suitable for use with clean water only

Clarke PSP105 Puddle Pump With Auto Sensor (Ref: 7230693) Read More »

Clarke HIPPO5A 750W Submersible Pump With Float Switch (Ref: 7230536)

750W Submersible pump with float switch – This efficient submersible electric powered water pump is perfect for draining and transferring water in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths. Note: Suitable for use with clean water only

750W 230V motor
Auto start/stop float switch
Outlet:1¼” BSP with 3 step adaptor; 1¼” hose, 1” BSP, 1” hose,
208 l/min rated maximum flow rate
0m/8.5m Min/max head
Cable length 10m
Weight 5.3kg

Clarke HIPPO5A 750W Submersible Pump With Float Switch (Ref: 7230536) Read More »

Clarke CES560 560kg Engine Stand (Ref: 7610123) From WWW.CLARKETOOLING.CO.UK

This foldable engine stand provides easy access to any part of the engine. Suitable for large engines up to 680kg in weight.

Fully adjustable mounting arms to hold different engine types
360 Degree swivel head with 8 pin increments for easy accessibility of all engine parts
2 wheels and 3 casters the 2 front swivel casters with brakes
Folds for easy storage

Clarke CES560 560kg Engine Stand (Ref: 7610123) From WWW.CLARKETOOLING.CO.UK Read More »

Clarke PSV7A 750W Submersible Pump With Folding Base (Ref: 7230696)

This powerful submersible pump is ideal for draining surface water including flooded cellars, sumps etc.

It can be used to remove both clean and dirty water. Using the fold down base allows water containing solid bodies up to 30mm in diameter to be pumped.

750W 230V motor
Adjustable position float switch automatically turns the pump off when water level drops
Outlet size 11/2” BSP with additional non-return valve and 4 step adaptor; 1” BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m

Clarke PSV7A 750W Submersible Pump With Folding Base (Ref: 7230696) Read More »

Clarke PSV5A Pump With Integrated Float Switch (Ref: 7236046) From WWW.CLARKETOOLING.CO.UK

750W Submersible Pump with integrated float switch.

This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches.

750W 230V motor
Selectable manual or auto mode. In auto integrated float switch automatically turns the pump off when water level drops.
Outlet size 11/2″ BSP with elbow and 4 step adaptor; 1″ BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m
Weight 4.5kg

Clarke PSV5A Pump With Integrated Float Switch (Ref: 7236046) From WWW.CLARKETOOLING.CO.UK Read More »

CNC Milling in the Workshop by Marcus Bowman – Book from Chronos

CNC Milling in the Workshop Hardback  (Ref: CRO10) A practical approach to using the CNC mill, aimed at everyone with a workshop, particularly modelmakers and horologists. CNC (computer numerical control) milling machines are now available to even the smallest of workshops, allowing designers to be more ambitious and machinists to be more confident of the production of parts, greatly

CNC Milling in the Workshop by Marcus Bowman – Book from Chronos Read More »